Skip to content
STRUXLABS
← All projects

New Structures · Residential

Apartment Building

Vattiyoorkavu, Thiruvananthapuram

Levels
5
Height
15.5 m
Plan
20 × 17 m
Apartment Building — render
Loading 3D model…
ETABS 3D MODEL

The project

A multi-storey apartment building at Vattiyoorkavu, Thiruvananthapuram, built on piles.

The challenge

This was an independent check of a design prepared by others. Every member had to be re-checked in a fresh ETABS model, so that undersized columns, beams and slabs could be found before construction.

Our approach

  • Independent check model in ETABS of the proposed structure
  • Checks of column dimensions and reinforcement, beam bars, slab design and slab types
  • Pile cap calculations

Outcome

A design check identifying where member sizes and reinforcement had to be revised, with the final checked model.

The structure in numbers

The ETABS model of this structure has 5 levels and rises 15.5 m over a footprint of about 20 × 17 m. It contains 137 columns and 381 beams, each checked and designed in the model. Members are designed in M25 and M30 concrete with Fe 500 reinforcement to IS 456: 2000. A modal analysis was run to check how the building sways and vibrates before the members were finalised.

Structural system

Concrete
M25, M30
Reinforcement
Fe 500
Typical columns
230 × 500 mm · 230 × 630 mm · 230 × 750 mm
Typical beams
230 × 400 mm
Slabs
120, 150 mm thick
Seismic design
IS 1893 (Part 1), zone III, soil type III, special moment-resisting frame
Analysis
3D ETABS model — linear static analysis
Foundation
Pile foundation with pile caps