Skip to content
STRUXLABS
← All projects

New Structures · GCC

Masjid — Ministry of Awqaf

Oman

Levels
3
Height
10.8 m
Plan
14 × 12 m
Masjid — Ministry of Awqaf — render
Loading 3D model…
ETABS 3D MODEL

The project

A masjid in Oman with an ablution block and shops.

The challenge

The project has three parts — the masjid, an ablution block and shops — each with its own foundation, and the structural design had to support the building permit for the Ministry of Awqaf.

Our approach

  • Foundation design for the masjid, the ablution block and the shops
  • Slab and beam layouts
  • ETABS model of the masjid in M30 concrete

Outcome

Structural design and drawings, supporting the building permit.

The structure in numbers

The ETABS model of this structure has 3 levels and rises 10.8 m over a footprint of about 14 × 12 m. It contains 42 columns and 72 beams, each checked and designed in the model. Members are designed in M30 concrete with Fe 415 reinforcement to IS 456: 2000. A modal analysis was run to check how the building sways and vibrates before the members were finalised.

Structural system

Concrete
M30
Reinforcement
Fe 415
Typical columns
Ø200 mm · 300 × 500 mm · 300 × 600 mm
Typical beams
200 × 400 mm · 200 × 600 mm · 200 × 700 mm · 200 × 500 mm
Slabs
150, 200 mm thick
Seismic design
IS 1893 (Part 1), soil type III, special moment-resisting frame
Analysis
3D ETABS model — linear static analysis