Skip to content
STRUXLABS
← All projects

New Structures · Government

Material Collection Facility

Kulathoor, Thiruvananthapuram

Levels
5
Height
10.5 m
Plan
23 × 8 m
Material Collection Facility — render
Loading 3D model…
ETABS 3D MODEL

The project

A material collection facility for the Kulathoor Grama Panchayat, Thiruvananthapuram, combining an RCC frame with a steel-braced light roof.

The challenge

A material collection facility needs a large, open floor for sorting and storing waste, which means wide spans and a light roof. A light metal roof is efficient, but it is sensitive to wind: suction can lift the sheeting and its supports, so the steel members and bracing had to be designed for uplift as well as for their own weight. The site conditions also called for a pile foundation rather than simple footings.

Why piles

When the ground near the surface cannot safely carry the column loads, piles take the load down to firmer strata. Pile caps then gather the load from each column into its group of piles, and they are tied together so the building acts as one structure on its foundation.

Our approach

  • RCC frame with steel bracing and roof members
  • Wind loads to IS 875 (Part 3) and seismic loads to IS 1893
  • Pile and pile-cap layout for the foundation

Outcome

Structural design with pile layout, column, beam and roof drawings.

The structure in numbers

The ETABS model of this structure has 5 levels and rises 10.5 m over a footprint of about 23 × 8 m. It contains 42 columns and 161 beams, each checked and designed in the model. Members are designed in M25 concrete with Fe 500 reinforcement to IS 456: 2000. A modal analysis was run to check how the building sways and vibrates before the members were finalised.

Structural system

Concrete
M25
Reinforcement
Fe 500
Typical columns
300 × 500 mm
Typical beams
230 × 450 mm
Slabs
150 mm thick
Roof
Steel members with metal sheeting
Floor loads
Water tank: 10 + 0.75 kN/m²
Seismic design
IS 1893 (Part 1), zone III, soil type II, ordinary moment-resisting frame
Wind
IS 875 (Part 3), basic wind speed 39 m/s
Analysis
3D ETABS model — linear static analysis
Foundation
Pile foundation with pile caps