Skip to content
STRUXLABS
← All projects

New Structures · Residential

Residential Building A

Nemom, Thiruvananthapuram

Levels
4
Height
10.9 m
Plan
11 × 11 m
Residential Building A — render
Loading 3D model…
ETABS 3D MODEL

The project

A private residence (Residence A) at Nemom, Thiruvananthapuram — one of two homes on the same site.

The challenge

Two homes were designed for the same site at the same time, so the grid lines, floor levels and foundation approach had to stay consistent between them while each house kept its own plan.

Our approach

  • Grid layout and building section prepared from the architecture
  • ETABS model with column and beam reinforcement checks
  • Footing and slab calculations

Outcome

Structural design and drawings for the residence.

The structure in numbers

The ETABS model of this structure has 4 levels and rises 10.9 m over a footprint of about 11 × 11 m. It contains 53 columns and 143 beams, each checked and designed in the model. Members are designed in M25 concrete with Fe 500 reinforcement to IS 456: 2000. A modal analysis was run to check how the building sways and vibrates before the members were finalised.

Structural system

Concrete
M25
Reinforcement
Fe 500
Typical columns
230 × 500 mm
Typical beams
230 × 400 mm · 230 × 500 mm
Slabs
120, 150 mm thick
Seismic design
IS 1893 (Part 1), zone III, soil type III, special moment-resisting frame
Analysis
3D ETABS model — linear static analysis