
Loading 3D model…
ETABS 3D MODEL
The project
A private villa on a sloping plot in the mountains of Jabal Akhdar, Oman.
The challenge
The villa sits on a sloping mountain plot, so the structure has to follow the ground: the layout was set out with the site levels, and the foundations were designed for the conditions on the slope.
Our approach
- Layout developed with the site topography
- ETABS model in M40 concrete
- Foundation design for the site conditions
Outcome
Structural design suited to the mountain site.
The structure in numbers
The ETABS model of this structure has 3 levels and rises 6.9 m over a footprint of about 16 × 24 m. It contains 52 columns and 103 beams, each checked and designed in the model. Members are designed in M40 concrete with Fe 500 reinforcement to IS 456: 2000. A modal analysis was run to check how the building sways and vibrates before the members were finalised.
Structural system
- Concrete
- M40
- Reinforcement
- Fe 500
- Typical columns
- 350 × 500 mm · 350 × 350 mm
- Typical beams
- 350 × 500 mm · 200 × 400 mm · 200 × 500 mm · 200 × 600 mm
- Slabs
- 200 mm thick
- Seismic design
- IS 1893 (Part 1), soil type III, special moment-resisting frame
- Analysis
- 3D ETABS model — linear static analysis


